Do you have a question about the Weller PYROPEN WP 60 and is the answer not in the manual?
Power | 60 W |
---|---|
Power Source | Butane Gas |
Ignition | Piezo ignition |
Burn Time | Approx. 90 minutes |
Type | Butane Soldering Iron |
Operating Time | Approx. 90 minutes |
Steps for igniting the device and adjusting temperature settings.
Instructions for attaching and using the hot blow tip accessory.
Procedure for refilling the device with butane gas safely.
Procedure for replacing the ejector unit when gas flow stops.