To Next PageTo Next Page
Need help?Do you have a question about the Weller WTHA 1 and is the answer not in the manual?
General| Brand | Weller |
|---|---|
| Model | WTHA 1 |
| Category | Power Tool |
| Language | English |
Configure preset temperature for the hot air gun when not in use, with options for deactivation or individual adjustment.
Set the time delay before the hot air gun automatically adjusts to standby temperature when idle.
Define the duration after which the hot air gun will automatically deactivate when not in use.
Allows switching the temperature display and input between Celsius (°C) and Fahrenheit (°F).
Enables activation, adjustment, and configuration of up to five parameter sets for reflow profiles.
Set the operating modes for the Air/UP and DOWN buttons for various device functions.
Adjust the intensity of the LCD display's backlight, adjustable from 0% to 100%.
Select the desired output type for the station, choosing between Zero-Smog or Robot output (RS232).
Provides troubleshooting steps and solutions for common error messages and device symptoms.
