Weller WXD 2010 User Manual (English)

Need help?

Do you have a question about the Weller WXD 2010 and is the answer not in the manual?

Weller WXD 2010 Specifications

General

Brand	Weller
Model	WXD 2010
Category	Power Tool
Language	English

Summary

Hardware Overview

Front Panel Interface

Display Overview

Temperature and Channel Status

Displays for set-point, actual, and fixed temperatures for each channel.

System Settings and Indicators

Safety and Intended Use

Intended Use Guidelines

Defines the proper use of the WXD 2 desoldering station.

Device Description

Key Functions and Features

Highlights the main capabilities and characteristics of the WXD 2.

Technical Specifications

Starting Up the Device

Critical Safety Warnings

Essential safety notices for initial operation, including electrical and burn risks.

Initial Connection Procedures

Instructions for connecting tools, air, and power.

Filter Maintenance Alert

Warning about the importance of the filter for the compressed air converter.

Operating the Device

Operating Principle and Controls

Explains the basic functionality and interaction with buttons and wheel.

Adjusting the Temperature

Parameter Menu Navigation

Connecting and Activating Tools

Setting Individual Tool Temperatures

Switching Channels On/Off

Soldering and Desoldering Best Practices

Setting Parameters via the Parameter Menu

Parameter Menu Structure

Setting Tool-Specific Parameters

Setting Standby Temperature

Setting Standby Time

Setting Automatic Switch-Off Time

Setting Temperature Offset

Setting Control Response

Setting Station Parameters

Locking the Station Controls

Defining Robot Output Assignment

Firmware Update Procedure

Connecting Auxiliary Devices

Setting Auxiliary Device Parameters

Error Messages and Troubleshooting

Display Errors and Tool Detection

Display and Power Issues

Channel Activation and Vacuum Problems

Troubleshooting for channels that fail to activate and vacuum issues.

Related product manuals