Need help?Do you have a question about the Weller WHA3000V and is the answer not in the manual?
Manual operation for controlling hot air temperature and air flow rate directly.
Automatic mode utilizing a 3-step time/temperature profile for process automation.
Setting parameters like temperature, air flow, and preheating in manual mode.
Configuration of the 3-step temperature-time profile for automatic operation.
How to set nozzle temperature, bottom heat, air flow, and program time for profiles.
Initiating the soldering process via control panel, foot switch, or console.
Methods for activating and managing the vacuum function during operation.
Procedure for saving and recalling up to 10 custom temperature-time profiles.
Using an external sensor for temperature measurement, with tool regulating setpoint.
Manual stage switching based on external sensor feedback during automatic profiles.
Tool temperature controlled by the external sensor's measured value.
General| Brand | Weller |
|---|---|
| Model | WHA3000V |
| Category | Power Tool |
| Language | English |
To Next Page
