Need help?Do you have a question about the Weller WSD 81i and is the answer not in the manual?
General| Fuse type | Cylindrical |
|---|---|
| Certification | CE |
| Product color | Black, Blue |
| Built-in display | Yes |
| Channels quantity | 1 channels |
| Temperature (min) | 50 °C |
| Display technology | LED |
| Temperature accuracy | 2 °C |
| Temperature stability | 5 °C |
| Power source | - |
| Heating power | 95 W |
| AC input voltage | 230 V |
Weight and Dimensions| Depth | 118 mm |
|---|---|
| Width | 170 mm |
| Height | 102 mm |
Sets standby time (0-99 min) or deactivates it. Indicates standby by flashing.
Allows adjustment of actual tip temperature by +/- 40 °C (+/- 72 °F).
Switches temperature display between Celsius (°C) and Fahrenheit (°F).
Locks nominal temperature settings. Unlock requires a 1-999 code entered via UP/DOWN buttons.
Limits temperature range to +/- 99 °C (+/- 178 °F) based on a locked temperature.
Resets all settings to default values. Confirmed by pressing UP/DOWN buttons simultaneously for 3 sec.
Defines intended use and adherence to instructions, documents, and national guidelines.
Instructs on proper disposal of electric tools according to European Directive 2012/19/EU.
Instructions for initial device setup, checking mains voltage, and plugging in.
Guidance on performing soldering and desoldering tasks according to operating instructions.
Best practices for coating, cleaning, selecting, and maintaining soldering tips.
To Next Page
