Need help?Do you have a question about the Weller WS 50 and is the answer not in the manual?
General| Power | 50 W |
|---|---|
| Voltage | 230 V |
| Temperature Range | 350 °C |
| Weight | 0.5 kg |
| Cable Length | 1.5 m |
| Temperature Stability | ± 5 °C |
Details the analog electronic control system, high-powered heating elements, and universal application of the soldering stations.
Describes various soldering irons (LR 21, MLR 21, MPR 30, WTA 50, WSP 80) and their specific applications and features.
Physical dimensions of the soldering station control unit (length x width x height).
Specifies the voltage and frequency for the control unit's power supply.
Details the power input in watts for both WS 50 and WS 80 models.
Defines the adjustable temperature range from 50°C to 450°C.
Indicates the accuracy of the temperature control relative to the target value.
Describes the method for connecting the unit to equipotential bonding for safety.
Instructions for assembling the soldering iron rest, placing the iron, connecting it, and initial power-up.
Details the four possible variations for equipotential bonding via the 3.5mm jack bush.
Guidance on initial heating, tip maintenance, and use of soldering irons.
Essential safety instructions for operating the soldering stations and handling tools.
List of optional accessories for the WS 80 and WS 50 soldering stations.
Details the components included in the WS 80 and WS 50 packages.
Key warnings covering work area order, surroundings, electrical safety, children, storage, and tool usage.
To Next Page
