Need help?Do you have a question about the Weller WX 2 and is the answer not in the manual?
General| Heating Element | Ceramic |
|---|---|
| Control | Digital |
| Standby Mode | Yes |
| Tip Compatibility | Weller WX tips |
| Channels | 2 |
| Voltage | 230 V |
Defines the proper and intended use of the WX 2 Soldering Station.
Lists the items included in the package with the WX 2 Soldering Station.
Details various methods for connecting the device to equipotential bonding.
Explains the basic operational principle and control elements of the WX 2.
General guidance on accessing and modifying station and tool parameters.
Procedure for configuring the standby temperature setting.
Configures the display language for the WX 2 interface.
Sets the temperature display to Celsius (°C) or Fahrenheit (°F).
Activates or deactivates the station's lock function for security.
Enables or disables audible feedback for button presses.
Adjusts the contrast of the liquid crystal display.
Configures the brightness of the display's backlighting.
Turns the screen saver function on or off.
Guide to connecting external devices like WFE or WHP to the WX 2.
Configures specific settings for connected auxiliary devices.
To Next Page
