Weller WX 2 - For your safety; Intended use; Included in delivery

4-20 WX 2
2 For your safety
The WX 2 Soldering Station repair system has been manufactured in
accordance with state-of-the-art technology and acknowledged
regulations concerning safety. There is nevertheless the risk of
personal injury and damage to property if you fail to observe the
safety information set out in the accompanying booklet and the
warnings given in these instructions. Always pass on the WX 2
Soldering Station to third parties together with these operating
instructions.
2.1 Intended use
Use the WX 2 Soldering Station only for the purpose indicated in the
operating instructions, i.e. for soldering and desoldering under the
conditions specified herein. Intended use of the WX 2 Soldering
Station also includes the requirement that you
− adhere to these instructions,
− observe all other accompanying documents,
− comply with national accident prevention guidelines applicable at
the place of use.
The manufacturer will not be liable for unauthorised modifications to
the device.
3 Included in delivery
− Soldering Station WX 2
− Power cable
− Operating instructions of the WX 2 Soldering Station
− Safety information booklet accompanying these instructions