Need help?Do you have a question about the Weller WX 1 and is the answer not in the manual?
General| Built-in display | Yes |
|---|---|
| Channels quantity | 1 channels |
| Temperature (min) | 100 °C |
| Temperature accuracy | 17 °C |
| Temperature stability | 2 °C |
| Power source | AC |
| Heating power | 200 W |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Soldering iron included | - |
Weight and Dimensions| Depth | 154 mm |
|---|---|
| Width | 174 mm |
| Height | 135 mm |
| Weight | 3420 g |
Steps for unpacking the unit and placing it correctly.
Connecting soldering tools, power cables, and air hoses to the unit.
Details on RS232, USB ports, and compressed air connections.
Instructions for powering the unit on and observing the display.
Typical airflow graph for WXA 2 with relevant data points.
Demonstration of turning the WX units on and off.
Process for adjusting and setting desired operating temperatures.
Introduction to parameter settings and menu navigation for WX stations.
Configuration of standby, operational modes, display, sound, and language settings.
Advanced settings including WXD2 vacuum control and specific operational parameters.
Guidelines to prevent electric shock and damage to the device.
Warnings and precautions regarding burns from hot tools and fire risks.
Guidance for user groups, maintenance, and safe work practices.
Information on proper disposal of equipment and handling flammable gases.
Explanation of common symbols and disposal instructions.
Detailed overview and identification of WXHAP 200 hot air tool components.
Information on operating instructions, safety guidelines, and relevant directives.
Definition of intended use and operational safety precautions for the WXHAP 200.
Details on what is included in the scope of supply and a description of the device.
Steps for commissioning the device and guidelines for its safe operation.
Information on available accessories and proper disposal procedures for the WXHAP 200.
To Next Page
