Weller WD 2M - User Manual

WD 2 / WD 2M
Betriebsanleitung - Operating Instructions - Manual de uso - Mode d'emploi - Istruzioni per lùso -
Manual do utilizador

Summary

Equipment Overview

Component Identification

For your safety

Specified use

Details the intended use and limitations of the soldering station.

Scope of delivery

Device description

Specifications of the WD 2; WD 2 M

Starting up the device

Safety Precautions for Startup

Highlights risks and necessary precautions before operating the unit.

Step-by-Step Startup Guide

Outlines the procedure for unpacking, connecting, and powering on the device.

Operating the device

Select channel, switch on or off

Setting the temperature

Details how to set the desired temperature for a selected channel.

Setting the temperature using the temperature buttons

Setting fixed temperatures

Soldering and unsoldering

Handling soldering tips

Setting temperature deactivation (SETBACK)

Setting the automatic switch-off time (AUTO-OFF)

Setting the temperature offset

Executing the calibration function (Factory Calibration Check)

WARNING! Risk of burns

Emphasizes burn hazard during calibration.

Changing calibration at 100 °C; 212 °F

Changing calibration at 450 °C; 850 °F

Fault messages and fault elimination

Weller WD 2M Specifications

General

Voltage	230 V
Temperature Range	150°C - 450°C
Temperature Accuracy	±9°C
Temperature Stability	±2°C
Channels	2
Cable Length	1.5 m