To Next PageTo Next Page
Need help?Do you have a question about the Weller WX1 and is the answer not in the manual?
General| Brand | Weller |
|---|---|
| Model | WX1 |
| Category | Soldering Gun |
| Language | English |
Identifies the main product models covered in the manual.
Lists the languages in which the operating manual is available.
Details the items included in the product package across different languages.
Categorizes soldering tips into Fast Response and Active Tip types.
Describes the front and rear interface ports of the devices.
Details vacuum and compressed air connection ports.
Illustrates the display of actual, nominal, and fixed temperatures.
Explains equipotential bonding and status indication.
Provides a visual guide for connecting the soldering station.
Diagrams showing tip connections for WX 1, WX 2, and WXD 2.
Illustrates how to connect various auxiliary devices.
Explains the fundamental operating principle in multiple languages.
Details the layout of the device display and indicators A and B.
Instructions on how to turn channels on and off.
Step-by-step guide for setting the nominal temperature.
Illustrates the process of selecting a fixed temperature.
Explains how to set and save fixed temperature values.
Details the button layout and their functions.
Explains the set-point temperature window for auxiliary devices.
Guidance on selecting and connecting auxiliary devices.
Instructions for setting parameters of auxiliary devices.
Explains how to open parameter settings for auxiliary devices.
Describes selecting auxiliary devices for temperature settings.
Details on opening parameter settings for auxiliary devices.
Provides essential safety warnings and precautions for users.
Specifies intended use, applied directives, and compliance.
Instructions for environmentally compatible disposal of electric tools.
Covers device startup procedures and basic operation.
Provides guidance on handling soldering tips and performing tasks.
Explains the overload cut-out mechanism for specific models.
Outlines the subdivision of the parameter menu into areas.
Lists the different categories of station parameters available.
Details settings for standby temperature and time.
Covers AUTO OFF time and sensitivity adjustment.
Explains offset, control response, and process window settings.
Covers language selection and temperature unit (°C/°F) settings.
Details password protection and touchtone settings.
Covers adjustments for LCD contrast and brightness.
Settings for the screen saver function.
Configuration options for the robot output feature.
Allows setting an ON delay for the vacuum pre-feed function.
Enables setting a vacuum run-on time to prevent clogging.
Describes different variants for equipotential bonding.
Steps for updating the device firmware via USB.
Instructions for cleaning and maintaining the operator panel.
Lists common error messages, their causes, and remedial actions.
Details warranty terms, claims, and conditions.
