Need help?Do you have a question about the Wellis MONT BLANC and is the answer not in the manual?
Key safety guidelines to read and follow before operating the hot tub.
Specific safety warnings and guidelines applicable to users in Canada.
Guidelines for selecting and preparing the hot tub installation site.
Specific requirements and considerations for indoor hot tub installations.
Recommendations for installing the hot tub on outdoor surfaces.
Instructions for installing the hot tub partially or fully below ground level.
Step-by-step instructions for filling the hot tub with fresh water correctly.
Overview of the Easy 4 keypad, its functions, and operations.
Explains how to use key hot tub functions like pumps, light, and modes.
Visual guide to the Easy 7 keypad layout and button functions.
Describes how to access and navigate the hot tub settings menu.
Explains the use of the Mode key for optional accessories and display settings.
Introduces the Smart Touch interface, its features, and interaction methods.
Explains the meaning of status icons displayed on the Smart Touch screen.
Step-by-step instructions for operating main hot tub functions via Smart Touch.
Details the functionality and installation of the auxiliary 4-button panel.
Explains the function and installation of the auxiliary single-button panel.
Describes the Aquasoul Pro audio system for hot tubs, its features, and connectivity.
Visual identification of Aquasoul Pro components, connectors, and inputs.
Details the "My Music" feature, likely a Bluetooth audio system for the hot tub.
Introduction to the bromine-based water sanitization system for hot tubs.
Step-by-step guide for initial setup, calibration, and operation of In.Clear.
Explains the installation, operation, and maintenance of the UV-C sterilization system.
Describes the filtration and ozone disinfection process for water quality.
Details how In.grid controls external heating sources for efficient hot tub temperature regulation.
Instructions for installing the In.grid accessory for heat source management.
Guide for installing the Home Transmitter (EN Module) for remote hot tub control.
Steps to connect the Home Transmitter to the network and power supply.
Explains the components, operational concept, and functions of the sand filter.
Instructions for properly filling the sand filter tank with sand.
Procedures for removing, cleaning, and maintaining filter cartridges.
Guidelines for cleaning and caring for the hot tub's exterior surface.
Steps for properly preparing the hot tub for winter to prevent damage.
Instructions for powering up the system and configuring the breaker settings.
Answers to common user queries regarding hot tub cleaning, water care, and maintenance.
Addresses questions about product specifications, temperature limits, and usage.
To Next Page
General
