Wellis Venus User Manual

Details 32amp power, RCD, 6mm armoured cable, and IP65 switch.

Instructions on removing vertical slats and the front panel.

Visual guide for wiring the spa system box.

8-step guide for initial spa setup before first use.

Recommends water changes and lists 7 maintenance aspects.

Importance of regularly testing spa water for chemical levels.

Explains importance of water balance and ideal levels.

Importance of sanitisers for killing bacteria.

Weekly oxidising treatment to remove wastes and maintain conditions.

Weekly cleaning of waterline and internal surfaces.

Using Instant Filter Cleaner and Immerse Filter for cartridges.

Guide on draining and refilling spa water.

Using FoamAway and ScaleAway products.

How to power up, link, and adjust settings.

Navigating menus, filter cycles, Ready/Rest modes.

Explains priming sequence and temperature warnings.

Covers freeze conditions and pump suction blockage.

Explains HFL, LF, and 'Heater may be Dry' errors.

Covers 'Heater is too Hot' (OHH) errors.

Covers 'Sensor Balance is Poor' and 'Sensor Failure'.

Covers 'No Communications' and 'Pre-Production Software'.

Covers memory, clock, configuration, and GFCI issues.

Addresses pump operation anomalies.

Connecting devices via Bluetooth for music playback.

Air regulators for waterfall control and directing water to seats.

How to attach a hosepipe for draining the spa.

Details 5-year shell, 2-year component, and 2-year labour warranties.

Outlines exclusions and legal disclaimers.

Checking for leaks and filter cleaning frequency.

Importance of water level and cover use for winter.

Chart detailing symptoms, causes, and remedies for water issues.

Answers to common queries like leak detection and heating issues.