Need help?Do you have a question about the Wellis ELBRUS 2018 and is the answer not in the manual?
General| Heater | 3 kW |
|---|---|
| Ozone System | Yes |
| LED Lighting | Yes |
| Waterfall Feature | Yes |
| Number of Jets | 36 |
| Insulation | Yes |
| Shell Material | Acrylic |
| Filtration System | Yes |
| Dimensions | 220 x 220 x 90 cm |
| Power requirements | 1 × 32A 230V/50Hz |
| Power Supply | 1 × 32A 230V/50Hz |
Key safety guidelines to read and follow before operating the hot tub.
Guidelines on water temperature limits and risks associated with high temperatures.
Measures to ensure children's safety, including supervision and preventing access.
Precautions to prevent electrical hazards and shock, including grounding.
General risks like slipping, falling, and keeping body parts away from moving components.
Precautions to prevent burns from hot water and surfaces.
Mandatory instruction to read and adhere to all safety guidelines provided.
Detailed electrical safety measures for installation and operation.
Directive to retain safety instructions for future reference.
Considerations for choosing and preparing the installation site for the hot tub.
Requirements for electrical setup, including emergency switches and cable specifications.
Detailed explanation of key functions like Pump 1, Pump 2, Light, and Off Mode.
Guide to programming the hot tub, including clock, filter cycles, and economy mode.
Detailed guides for Endurance, Lap, Transition, Cardio, Power, and Personalized training drills.
Operating the in.clear system, including ON/OFF, BromiCharge, and maintenance levels.
Introduction to the bromine-based water sanitization system.
Step-by-step guide for installing and setting up the in.clear system.
How to add sodium bromide (BromiCharge) and calculate the correct dosage.
Explanation of Maintenance and Boost modes for the in.clear system.
Diagnosing and resolving common issues with the in.clear system.
Steps for installing the Home Transmitter module for remote access.
Connecting high voltage accessories to the W8000 control system.
Wiring the heat.wav water heater for the W8000 model.
Setting the GFCI/RCD rating and phases for safe operation.
How the system verifies water flow to prevent dry-fire conditions.
To Next Page
