Need help?Do you have a question about the Wellpro WP9038ADAM and is the answer not in the manual?
Details on analog/digital channels, accuracy, temperature, power, and installation.
Defines the function of each analog, digital, and communication interface pin.
Illustrates the connection for digital input using an optocoupler.
Shows the circuit for digital output control with an NPN transistor.
Diagrams for connecting two-wire and three-wire analog sensors.
Specifies the default baud rate, parity, data bits, and stop bits.
Provides Modbus RTU commands for reading analog input values.
Details Modbus RTU commands for reading digital input states.
Commands for controlling multiple and single digital outputs.
Commands for querying the current state of digital outputs.
Instructions for setting or changing the module's network address.
Commands to configure communication parameters like baud rate and parity.
Explains the meaning of the device's LED status indicators.
Guide for using software to set parameters and test device functionality.
General| Brand | Wellpro |
|---|---|
| Model | WP9038ADAM |
| Category | Control Unit |
| Language | English |
To Next Page