EasyManua.ls Logo

Wells F-49 - User Manual

Wells F-49
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
PRINTED IN UNITED STATES OF AMERICA
WELLS BLOOMFIELD, LLC
10 Sunnen Drive P.O.Box 430195
St. Louis, MO 63143 USA
telephone: 314-781-2777
fax: 314-781-2714
www.wellsbloomfield.com
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
OWNERS MANUAL
STANDARD
FRYERS
COUNTERTOP
MODELS
F-14
F-49
F-55
F-67
F-85
F-1725
Includes
INSTALLATION
USE & CARE
EXPLODED VIEW
PARTS LIST
WIRING DIAGRAM
301
p/n 2M-307588 Rev. C M301 090127 cps
Model F-14
Model F-55
Model F-85
Model F-1725

Other manuals for Wells F-49

Questions and Answers

  • D
    daniel07Aug 11, 2025
    What to do if my Wells Fryer will not heat?
    • D
      donaldgriffinAug 12, 2025
      If your Wells Fryer isn't heating, first ensure it's properly plugged into the receptacle and that the circuit breaker hasn't tripped. Next, check that the temperature control knob is set to the desired temperature. Also, the hi-limit safety may have tripped; in this case, clean element1 and reset the hi-limit. For damaged internal components, contact a Wells Authorized Service Agency for repairs.
  • T
    Tara HoldenAug 19, 2025
    Why is my Wells Fryer not maintaining temperature?
    • C
      Cheryl BuchananSep 12, 2025
      If your Wells Fryer isn't maintaining temperature, the temperature control thermostat thermobulb might be contaminated with cooking debris; clean element2. If the issue persists, it could be due to damaged internal components, in which case you should contact a Wells Authorized Service Agency for repairs.
  • K
    kevingrayAug 27, 2025
    How to fix a Wells Fryer when the element head is not working properly?
    • A
      Alyssa PachecoAug 27, 2025
      If the element head of your Wells Fryer will not raise, stay up, or lower, check the frypot position and clean any excess cooking debris from the bottom of the frypot. If the problem persists, it could be due to a damaged hinge bracket or support rod, in which case you should contact Wells Authorized Service Agency for repairs.
  • K
    Kristina AlexanderSep 3, 2025
    What to do if my Wells Fryer leaks oil?
    • C
      Casey FrederickSep 3, 2025
      If your Wells Fryer is leaking oil, it may be due to a damaged frypot. Contact a Wells Authorized Service Agency for repairs.

Wells F-49 Specifications

General IconGeneral
BrandWells
ModelF-49
CategoryFryer
LanguageEnglish

Related product manuals