Welltec System postmate 3 - Chapter 4 - Handling Errors; Error Message Reference

- 23 -
Postmate 3 User’s Manual
Chapter 4 - Handling Errors
4-1 Error Message
There are various types of sensors located at different parts of Postmate 3. These
sensors detect and display the location of an error on the panel. Please read the
following errors to understand how to handle each error.
Error Message
Miss feeding
Right cover open
Out of paper
Lower cassette missing
Paper thickness err
Stacker full
Press jam
Jam infeed sensor
Left cover open
Jam folder
When a form does not reach the infeed sensor after
infeed.
When a form is jammed at the infeed sensor.
When a form is jammed at the folding unit.
When a form is jammed at the press unit.
When the stacker is full and the last form is detected
by the outfeed sensor.
When the paper thickness sensor cannot detect the
thickness of the form.
When the lower cassette is not closed all the way.
When there are no forms on the paper tray or the
paper sensor is not detecting any forms.
When the upper cassette safety cover is opened.
When the feeding unit safety cover is opened.