- 25 -
Postmate 3 User’s Manual
Feed roller
Separate roller
(below feed roller)
Pick-up roller
Chapter 5 - Maintenance
5-1 Exchanging Friction Reverse Roller
The feeding rollers consist of three different rollers;
1. Pick up roller
2. Feed roller
3. Separate roller
It depends on the paper weight, type and etc., but please check the parts and change
when you produce over 100,000 products, if necessary. How to change the parts are as
follows;
1. Remove the snap ring (white clip).
2. Replace the roller and place back the snap ring.
3. Follow step 1 & 2 for the rest of the rollers.
To Next Page
Loading...