www.Welltec.pro 17
When using this function, remove the air exhaust pipe, then remove the rubber plug from
the upper drain hole (1) and connect the drain pipe to it. Place the tube in a place where
water can be safely drained. To improve the dehumidification efficiency, keep all doors and
windows in the room closed.
Warning. When using the dehumidify function, the fan speed cannot be changed. It is set
to the highest level by default.
When using the air conditioner, the internal condensate tank may become full without
proper drainage. This is indicated by the E4 code on the control panel display. To remedy
this error, remove the rubber plug from the lower condensate drain hole (2) and connect
the drain pipe to it. After removing the water, restart the machine.
To Next Page
