Need help?Do you have a question about the WELLTECH WELLGATE 2608 - V1.00 and is the answer not in the manual?
General| Model | WELLTECH WELLGATE 2608 - V1.00 |
|---|---|
| Category | Gateway |
| Device Type | VoIP Gateway |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 5% to 95% (non-condensing) |
| Ports | 8 FXS ports |
Details network protocols and features like IPv4, DHCP, DNS, NAT, and QoS.
Covers VoIP specifications including SIP, codecs, VAD, CNG, Echo Cancelation, and Jitter Buffer.
Explains the meaning and behavior of LED indicators on the front panel of the WellGate 2608.
Describes how to log in to the WG2608 web configuration menu by entering its IP address in a web browser.
Guides users through the initial setup using the Installation Wizard, covering network connection, configuration, and protocol settings.
Provides instructions for setting up the WAN port connection, covering Static IP, DHCP, and PPPoE methods.
Details how to configure the SIP account for making VoIP calls, including proxy addresses, ports, and user credentials.
Describes how to configure digit manipulation rules for routing dialed numbers, including prefix, function, and insert/drop operations.
Covers general system configuration settings like DTMF types, dial key, DSCP values, Call Transfer, Call Waiting, T.38, and Fax redundancy.
Explains how to select and prioritize codecs (G.711, G.723, G.729) and configure packet sizes for voice transmission.
Explains how to change the login password for the device, specifying username, current password, and new password.
Displays the current network connection mode, IP address, subnet mask, default gateway, DNS addresses, and WAN MAC address.
To Next Page
