Why is the projected display warped on my WEMAX L176FGN?
To resolve a warped projected display on your WEMAX TV, ensure the surface under the projector is entirely level. For the best viewing experience, it's highly recommended to use an ALR screen. The issue might be caused by uneven or non-flat walls.
How to enable 4K on HDMI input for WEMAX L176FGN?
If your HDMI input source isn't displaying in 4K on your WEMAX TV, access the TV Options menu by pressing and holding the Select button on the remote while on the HDMI input. Go to Settings and enable HDMI 2.0. Also, verify that the display settings on your source device are set to output 4K at 60 Hz.
How to reduce input lag on WEMAX TV for gaming console?
To fix excessive input lag with a game console connected via HDMI to your WEMAX TV, press and hold the Select button on the remote while on the HDMI input to open the TV Options menu. Then, navigate to Image and select Game Mode.
What to do if HDMI source isn't visible on WEMAX TV?
If the HDMI source is not visible on your WEMAX TV, go to the AndroidTV home dashboard, move the cursor to the Inputs menu in the top right corner, and select Inputs. If you're using a laptop or PC, check its settings to allow screen sharing or extension.
How to fix Google Play apps crashing on WEMAX L176FGN?
If Google Play apps are crashing on your WEMAX TV, check for available updates. Open the Google Play Store and go to My Apps to find and download any updates.
What to do if WEMAX TV overheats and turns off?
If your WEMAX TV overheats and automatically turns off, remove any obstructions from the air inlets and outlets to ensure proper airflow. Then, turn off the projector and disconnect it from the power, wait a moment, plug the power cord back in, and turn the projector back on.
What to do if my WEMAX TV has a screen display error?
To resolve a screen display error on your WEMAX TV, try turning off the projector, disconnecting it from the power, plugging the power cord back in, and then turning the projector back on.
How to fix Android system crashes on WEMAX TV?
If the Android system crashes on your WEMAX TV, turn off the projector, disconnect it from the power, plug the power cord back in, and turn the projector back on. Also, check for a system update by going to Settings -> Device Preferences -> About -> System update.
How to fix no projected image on WEMAX L176FGN?
If there is no projected image on your WEMAX TV, turn off the projector, disconnect it from the power, plug the power cord back in, and turn the projector back on.
Advises supervising children and avoiding direct eye exposure to the projector beam.
Advises on using the correct power cord and avoiding fire hazards near the device.
Details precautions for placement, viewing, disassembly, and environmental operating conditions.
Outlines steps for ceiling mounting and provides crucial installation cautions.
Provides step-by-step instructions for pairing the remote control with the projector.
Describes the infrared sensor that detects human presence and protects eyes from bright light.
Provides instructions on cleaning the projector's glass and lens safely using appropriate materials.
Addresses common problems like no image, system crashes, and remote control issues.
Covers issues like overheating, warped display, app crashes, and HDMI connectivity problems.
To Next Page
General