The Wemo® device is a smart plug designed to control appliances remotely and monitor power usage. It comes in several models, including the Wemo® Insight Smart Plug (F7C029), Wemo® Switch Smart Plug (F7C027), and Wemo® Switch + Motion (F5Z0340).

Function Description:

The primary function of the Wemo device is to turn connected appliances ON or OFF remotely via a mobile application. For models like the Wemo® Insight Smart Plug, it also offers power monitoring capabilities, allowing users to track electricity consumption and duration of usage. The Wemo® Switch + Motion model includes a motion sensor, enabling automated control based on detected movement. The device integrates with Wi-Fi networks, allowing control from anywhere with an internet connection. It also supports voice control through platforms like Amazon Echo™, enabling users to manage appliances using voice commands.

Important Technical Specifications:

Compatibility: Requires Android™ 4.4 or higher or iOS 9.0 or higher.
Network: Operates on a 2.4 GHz Wi-Fi frequency.
Security: Supports WPA™, WPA2™, and WEP security types for Wi-Fi connections. Passwords for Wi-Fi should be eight to 63 characters long, comprising numbers, letters, and special characters.
Voltage: Wemo Insight's voltage requirements vary by region/country. Users must check the voltage specification on the device's sticker (back or bottom) before plugging it into a power outlet.
Motion Sensor (Wemo Motion): Consists of two parts: a sensor and a plug, which must be securely connected.

Usage Features:

Remote Control: Users can turn appliances ON/OFF from their mobile device using the Wemo App.
Power Monitoring (Wemo Insight): Tracks average electricity spent and usage duration. It can also calculate operating costs based on user-input currency. This feature includes "Usage Alerts."
Motion-Activated Control (Wemo Motion): Allows appliances to be controlled based on motion detection.
Scheduling Rules: Users can create "Schedule Rules" to automate turning appliances ON/OFF at specific times. These rules are stored on the Wemo device itself.
Voice Control: Compatible with Amazon Echo™ devices, enabling control via Alexa voice commands. Users can turn individual Wemo devices or groups of devices ON/OFF.
Customization: Users can customize device names, add pictures for easy identification within the Wemo App, and group multiple devices for simultaneous control.
Remote Access: Once set up, the device can be controlled remotely from anywhere with an internet connection. This feature can be enabled or disabled within the app.
Easy Setup: The setup process involves downloading the Wemo App, enabling Wi-Fi on the mobile device, connecting to the Wemo device's temporary Wi-Fi network (Wemo ID), entering the router's Wi-Fi password, and then configuring device settings.

Maintenance Features:

Firmware Updates: The Wemo device's firmware can be updated through the Wemo App. The device checks the Wemo Firmware Server daily for new releases and prompts users to install updates. Updates ensure smooth operation and provide the latest features. During an update, the device's lights will blink.
Troubleshooting: The manual provides solutions for common issues such as:
- Device not showing up: Ensure the mobile device and Wemo are within router range, Wemo is plugged in, and try rebooting the Wemo or resetting it. For Android devices, disabling "Smart Network Switch" or "Auto-switch to mobile network" is recommended during setup.
- Multiple WAP environment: Ensure the mobile device is connected to the same Wi-Fi as the Wemo devices.
- Intermittent Wi-Fi connection: Test the Wemo device near the router, ensure no interference, and check router specifications for device limits.
- Remote Access failed: Verify Remote Access is enabled in the app, ensure a strong internet connection, and restart the mobile device. Issues may arise with Apple® routers.
- Device turns ON by itself: This may indicate a hidden rule; restoring the device to factory defaults can resolve this.
- Schedule Rule not saving: Check existing rules and device settings.
- Duplicate devices: Disable and re-enable the Remote Access feature in the Wemo App.
- Device "Loses" settings: After firmware updates, power cycle the device (unplug for 20 seconds). For blinking orange/blue status lights, move the device closer to the router or set the router to a static channel (Auto recommended). If the Wi-Fi name is hidden, broadcasting it usually resolves the issue.
- Device not connecting to router's Wi-Fi: Check router type (supports WPA™, WPA2™, WEP), change Wi-Fi channel (Auto recommended), ensure Wi-Fi is broadcasting at 2.4 GHz (Wireless-B, -G, or -N standards), and verify the Wi-Fi password.
Factory Reset: For persistent issues or to remove hidden rules, restoring the Wemo device to factory defaults is an option. This will erase custom names, pictures, and stored rules, requiring re-setup.
App Reinstallation: If problems persist, uninstalling and reinstalling the Wemo App is suggested.

Wemo Insight Smart Plug - Page 5