Quick setup
Use the Apple Home app to:
G)
Add Wemo Stage
as
an
accessory
Create scenes
that
con
trol
your
smart devices
Assign scenes
to
buttons
on
Wemo Stage
G)
Adding
to
Apple Home
1.
Install battery into
the
controller with
the
positive side
facing up
2.
Press any
button
on
the controller
to
begin setup
mode
(light
will blink yellow and green)
3. Launch the Apple Home app
4. Hold the controller within
an
inch
of
the
top
edge
or
the
back center
of
your phone and follow the
prompts when they appear.
Don't
see
the
prompts? You'll need
to
add ( +) Wemo Stage
as
an
accessory
in
the Home app by manually entering the
8-digit
HomeKit code
on
the back
of
this guide.
To Next Page
Loading...