Wemo Stage - Troubleshooting

Installing or
changing battery
Remove the cover
on the back of the
controller
Install CR2032 battery
in the compartment
positive(+) side up
Troubleshooting
Restart
Having setup or control issues? Remove
and re-insert the battery to restart.
Factory restore
Replace back cover
~
If a restart doesn't help, factory restore ~ 1n4
II
1!=J 5678
your contro er. ~
1. Press and hold Restore button ~ )
for 5 seconds Restore-+++----
button
2. Wait for the light to blink yellow,
then green and release
3. Re-add your Wemo Stage to Apple
Home and reassign scenes to buttons