88
LOADING THE FASTENERS
CAUTION: Always disconnect the tool from the air supply before loading fasteners.
1. Press the lock to release the movable magazine and pull the magazine out fully.
2. Place a full clip of the specified type and size fasteners on the fixed magazine,
up to 100 fasteners may be loaded in the magazine.
3. Push the movable magazine forward until it was locked.
OPERATION
ACTUATING TOOL
WARNING: To reduce the risk of injury, always wear proper eye and hearing protection when operating this
tool.
WARNING: A nail will fire each time the trigger is pressed as long as the contact trip remains acti-
vated which could result in inadvertent actuation.
1. Press the contact trip firmly against the work surface.
2. Press the trigger.
To Next Page
Loading...
Need help?
General
