Wen TC1014

14-INCH
ELECTRIC TILLER
Instruction Manual
IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability,
ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use
your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
TECHSUPPORT@WENPRODUCTS.COM1-800-232-1195 (M-F 8AM-5PM CST)
For replacement parts and the most up-to-date instruction manuals, visit WENPRODUCTS.COM
MODEL TC1014

Wen TC1014 Specifications

General

Brand	Wen
Model	TC1014
Category	Tiller
Language	English

Summary

GENERAL SAFETY RULES

WORK AREA SAFETY

ELECTRICAL SAFETY

Crucial safety precautions related to the electrical aspects of the tiller.

PERSONAL SAFETY

Advice on personal protective equipment and safe operating practices.

ELECTRIC TILLER SAFETY WARNINGS

GROUND FAULT CIRCUIT INTERRUPTER (GFCI)

Requirement for GFCI protection for electrical safety when operating the tiller.

DISCONNECT UNIT AND CORD SAFETY

Procedures for disconnecting power and safe handling of the power cord.

OPERATING CONDITIONS AND ALERTNESS

Warnings about operating in slopes, staying alert, and checking for foreign objects.

VIBRATION AND MAINTENANCE SAFETY

Precautions regarding abnormal vibration and safety during maintenance.

WATCH FOR CORD AND WATER CONDITIONS

Awareness of the cord's position and avoiding wet conditions to prevent shock.

CAUTIONS AND WARNINGS

ELECTRICAL INFORMATION

DOUBLE-INSULATED TOOLS

POLARIZED PLUGS AND GFCI

EXTENSION CORD GUIDELINES

ASSEMBLY & ADJUSTMENTS

OPERATION

CONNECTING TO POWER SUPPLY

CONNECTING THE EXTENSION CORD

POWERING ON & OFF

TILLING

STARTING AND OPERATING THE TILLER

Instructions for starting the tiller and guiding it forward during operation.

TILLING TECHNIQUES

Methods for breaking sod, deep tilling, and recommended tilling patterns for seed beds.

SAFETY PRECAUTIONS DURING TILLING

Warnings about moving backwards, cord placement, and working on inclines.

OPERATION AND MAINTENANCE

MOVING AND STOPPING THE TILLER

CLEARING FOREIGN OBJECTS

ROUTINE INSPECTION

CLEANING PROCEDURES

MAINTENANCE AND STORAGE

TINES REMOVAL AND INSTALLATION

TROUBLESHOOTING GUIDE

MOTOR DOES NOT START

Diagnosing and solving issues when the tiller's motor fails to start.

ABNORMAL NOISE AND VIBRATIONS

Identifying causes and solutions for unusual noises and excessive vibrations.

UNSATISFACTORY PERFORMANCE AND OVERHEATING

Addressing issues like poor performance and tool overheating.

WARRANTY STATEMENT