Wen TC1318

Questions and Answers:

A
Alyssa JohnsonJul 29, 2025
Why won't my Wen TC1318 motor start?
- A
  amyowensJul 29, 2025
  If the Wen Tiller motor doesn't start, first, ensure the tiller is plugged into a working outlet and switched on. Check the power and extension cords for damage and proper connection. If the motor is overloaded, wait 15 minutes before trying again, and avoid using the tiller in soil with hard objects or when the soil is wet or frozen. If the carbon brushes are worn, contact customer service at 1-800-232-1195.
J
Joann DodsonAug 3, 2025
What to do if my Wen TC1318 is overheating?
- K
  Kevin JacksonAug 3, 2025
  If your Wen Tiller is overheating, reduce the load on the motor by working slower and shallower. Avoid using the tiller in soil with many hard objects or when the soil is wet or frozen. Also, ensure you are using an extension cord of the appropriate gauge and length.
S
Sara PowellAug 10, 2025
How to improve the Wen Tiller's performance?
- P
  pdiazAug 10, 2025
  If you're experiencing unsatisfactory performance with your Wen Tiller, it could be due to worn or damaged tines, in which case you should replace them. It could also be that you're not working deep enough; try working slower and deeper with the tiller.
E
Eric PhelpsAug 16, 2025
How to fix abnormal noise in Wen Tiller?
- B
  Brittany WillisAug 16, 2025
  If your Wen Tiller is making abnormal noises, the tines may be worn or damaged and need replacement. Alternatively, the working depth might be too shallow, so try working slower and deeper with the tiller.
M
micheal15Aug 21, 2025
What causes excessive vibrations in Wen TC1318 Tiller?
- L
  Lisa MartinezAug 22, 2025
  If the Wen Tiller is vibrating excessively, tighten all bolts. If the vibrations continue, contact customer service at 1-800-232-1195.