EasyManuals Logo

Wenger Clock User Manual

Default Icon
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
3. Lay the open watch on a flat surface, ensuring that the open case is at a 90
degree angle in relation to the compass, so that the compass is flat.
4. Your compass will adjust to accurately reflect orientation within 30 seconds;
the arrow may undergo some movement during this period.
5. Once still, the red arrow will be pointing North. Gripping the coin-edge
around the exterior of the compass window, simply rotate the compass face
until the North indicator (red “N”) is directly under the tip of the red arrow.
Allow another 10 seconds for the arrow to adjust to the movement.
6. Your compass now accurately reflects your orientation.
16 17
Then set the watch hands to the correct time. Turn the watch hands past 12
once if you’re setting the watch for a P.M. time.
4. Push the outer crown back in to Position 1.
Setting the Time Only
Pull out the outer crown to Position 4 (two “clicks” out) and set the time by
turning the crown clockwise or counter-clockwise.
Note: In order to ensure that your watch remains water-resistant, it is important
that you make certain the crown is always returned to Position 1.
Operating the Compass
One of the most useful and interesting features of your G3 Navigator is the
patented flip-open case that reveals a compass. Operating the compass is very
simple (see diagrams on page 15):
1. Unscrew inner crown by rotating in a counter-clockwise position until
crown resists.
2. Once the inner crown is unscrewed, flip open the case by lifting the crown up.
1
2,3
4
5,6

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wenger Clock and is the answer not in the manual?

Wenger Clock Specifications

General IconGeneral
BrandWenger
ModelClock
CategoryWatch
LanguageEnglish

Related product manuals