Wenger Clock User Manual

1514
Operating Instructions For Flip-Open Compass Watch
Note: For watches featuring a swing-out compass watch, see page 16.
Your Wenger Swiss G3 Navigator Compass watch has two crown components
(illustration below) and four crown positions (right):
Component 1 – Inner security-screw crown
used to lock down or open the case to reveal
the compass.
Component 2 – Outer crown used to adjust
time and date. Inner security-screw crown
need not be unscrewed to set time and date.
Position 1 – Both components fully depressed and screwed down for general
use and wear.
Position 2 – Inner crown unscrewed to flip open the dial and reveal the compass.
Position 3 – Outer crown extended one “click” out for use in setting the date.
Position 4 – Outer crown extended two “clicks” out for use in setting the time.
Setting the Date and Time
1. Set the crown of the watch to Position 3 (pull outer crown one ”click” out).
2. Turn the crown counter-clockwise until the date shows one day earlier than
the date you want to set.
3. Pull out the crown to Position 4 (two “clicks” out). Turn the crown counter-
clockwise so the watch hands move clockwise until the current date shows.
(continued on next page)
Position 1 Position 2 Position 3 Position 4

Wenger Clock Specifications

General

Brand	Wenger
Model	Clock
Category	Watch
Language	English