23
SAFETY
3.6 Safety tests
performed at the factory by the device manufacturer
1. Risk analysis based on Machinery Directive 2006/42/EC
(Annex I) and DIN EN ISO 12100:2011.
2. Sound pressure measurement (no report required, as LPA < 70 dB(A))
according to Machinery Directive, Annex I
3. Inspection and testing according to DIN EN 61010-1: 2011 2011
3.7 Safety checks
The safety tests and checks of the TOPITEC
®
TOUCH have been performed by the
manufacturer at the factory. All relevant procedures and results have been documented.
The device operator is obliged to carry out all repeat safety checks and tests according to
BGV A3.
To Next Page
Loading...