76
TOPITEC
®
TOUCH User Manual | 11-2020
12.3 Inspection intervals – function testing
To ensure trouble-free and safe operation of your TOPITEC
®
TOUCH mixing system,
it must be regularly inspected for damage. Also, its switches and buttons must be checked at
regular intervals for proper functioning. With one-shift operation, perform a function test of all
switches and buttons every three months. Make sure that the warning signs on the device
are visible at all times. Inspect the power cable at least once a year for visible damage to the insu-
lation and at the contacts. All rotating and moving device components must be inspected at least
once a month. If you encounter any problems or have any queries, please contact your dealer.
12.4 Warning signs attached to the TOPITEC
®
TOUCH mixing system
The following warning signs are attached to the TOPITEC
®
TOUCH when delivered:
Check these signs regularly to ensure that they are properly visible.
Warning Position on device
• Power connection
• Base plate
• Tool shaft adapter
• Base plate
Table 3 Warning signs attached to the TOPITEC
®
TOUCH
To Next Page
Loading...