INCLUDED FASTENERS
Parts and Tools For Aluminum Attic Ladder
2
(10) 1/4" Hex Head
Lag Screws
3" Long
(2) 1/4"- 20 Hex Head
Cap Screws
3/4" Long
(2) 1/4" - 20 Lock Nut
(11) 1/4" Washers
TOOLS NEEDED
Carpenter’s Square
Drill
Hammer
Hacksaw
Drill Bit, 1/8"
Drill Bit, 9/32"
Pencil
Stepladder
Tape Measure
Wrench, 7/16" (2)
Phillips Driver
ADDITIONAL MATERIALS NEEDED
(10) #8 Deck Screws, 2"
1 x 4 Temporary Support Boards
(2 pieces approximately 32" long)
Shims
INCLUDED COMPONENTS
(1) Left Foot
Assembly
(1) Right Foot
Assembly
(1) Pull Rope Assembly
(1) Ladder Assembly
DO NOT REMOVE NYLON TIE HOLDING THE LADDER SECTIONS
TOGETHER UNTIL INSTRUCTED
(1) Assist Pole - See
Separate Instructions
(1) Assist Pole Bracket
To Next Page
Loading...