WERTHEIM Pro Multi Steamer - ASSEMBLY; Assembling Extension Tubes; Attaching Steam Mop Head

11
Pro Multi Steamer
ASSEMBLY
IMPORTANT! THE CLEANER SHOULD BE SWITCHED OFF BEFORE ASSEMBLY.
EXTENSION TUBES
1. Connect the extension tube to the
handle. Push the extension tube into the
handle until it clicks into position.
2. Connect the second extension tube to
theendoftherstextensiontubeuntilit
clicks into position.
STEAM MOP HEAD
1. Connect the extension tubes to the
handle of the cleaner as per the
instructions in this manual. Insert the
extension tube into the mop head
ensuring that it clicks into position.
2. Attach the mop pad onto the base of
the mop head, as shown.