20
IMPORTANT! Do not operate the cleaner over the power cable.
IMPORTANT! Keep the mop head moving during operation. Operating
the mop head in a stationary position for an extended period of time
can cause damage to the oorboards and make the ooring slippery.
Attention: If the cleaner is sitting on idle for 2 hours, it will automatically
switch the boiler heater off. In this situation the On/Off indicator will stay
ashing Blue.
When the steam release trigger is activated, the cleaner will switch on the
boiler heater. The On/Off indicator will stay on Blue.
4. To produce steam press the Steam Trigger on
the handle.
5. When steam is emitting from the cleaner
slowly pass over the surface to be cleaned.
To Next Page
Loading...