22
STEAM CLEANING CARPETS
1. Place the mop head onto the Carpet
Glider and insert as shown. The Carpet
Glider will click into position when
installed correctly.
2. Follow steps 1-5 from pages 19 & 20 to
steam clean your carpets.
3. To remove the Carpet Glider, place one
foot onto the Carpet Glider release and
gently remove the mop head.
NOTE: Before using the cleaner, vacuum carpeted surfaces thoroughly.
Use a vacuum cleaner with a powerbrush for best results.
IMPORTANT! Do not use the cleaner without a mop pad and Carpet
Glider attached onto the mop head.
To Next Page
Loading...