WERTHEIM Pro Multi Steamer - Connecting Accessories to Extension Tubes

25
Pro Multi Steamer
CONNECTING THE ACCESSORIES ONTO THE
EXTENSION TUBES
1. The Window Squeegee and the High
Pressure Steam Nozzle can connect
directly onto the extension tubes, as
shown. The accessories will click into
position when installed correctly.
2. Connect the Accessory Connector onto
the extension tube. Select a Specialised
Cleaning Brush or Jet Nozzle and install
the accessory by inserting it into the end
of the Accessory Connector and rotating
the accessory until it is locked into
position.