WERTHEIM Pro Multi Steamer - Boiler Drainage Procedure

27
Pro Multi Steamer
1. Remove the water tank from the steamer
and add 100ml of a descaling solution
into the water tank. Fill the rest of the tank
with water.
2. Re-tthewatertankbackintothe
steamer and plug the steamer into the
power supply.
3. Press the On/Off switch. The steamer
needs to run until the water tank is empty.
Please ensure this is actioned in a well-
ventilated area.
4. Unplug the steamer from the power
supply and allow the steamer to rest
for at least 2 hours before removing the
drainage plug located at the bottom of
the steamer.
5. Removethedrainagecapcoverrst.
Use the drainage cap cover to open the
drainage cap.
Caution! Burns can occur from touching the drainage plug. Please allow
the steamer to cool down completely before removing the drainage
plug.