To Next PageTo Next Page
Need help?Do you have a question about the WERTHER INTERNATIONAL 209I/A and is the answer not in the manual?
Details on how the lift is shipped disassembled into various parts and packing weight.
Instructions for safely lifting and moving the lift crates using equipment.
Guidelines for storing packed machinery and managing crates.
Overview of the manual's purpose and important warnings for users.
Emphasis on thoroughly reading Chapter 3 for safety information and warnings.
Manufacturer disclaims responsibility for injury due to unauthorized use or abuse.
Definitions for 'operator' and 'maintenance fitter' roles.
Details on the fixed structure consisting of posts and upper beam.
Identification of command, service, front, and rear sides of the lift.
Description of moving units, lift unit, hydraulic power unit, control box, and safety devices.
Key specifications including capacity, lifting time, weight, noise level, and operating conditions.
Detailed specifications for the electric motor.
Details on the hydraulic unit pump, including type and pressure ratings.
Schematic diagram of the hydraulic system.
List of electrical components for three-phase systems.
List of electrical components for single-phase systems.
Specifies the maximum width and wheelbase for vehicles to be lifted.
Warnings regarding vehicle weight limits and potential interference with low-clearance vehicles.
General safety rules, manufacturer liability, prohibited uses, and operator position.
Rules for safe operation, including operator location and danger zones.
Precautions for electric shock, protection devices, and vehicle movement.
Information on electrical hazards and protective measures.
Guidelines for safe handling of vehicle movement during operation.
Details on risks of crushing the operator or personnel, and impact hazards.
Risks associated with vehicle movement, overload, and imbalance.
Description of safety devices installed to protect against overload and equipment failure.
Measures to prevent vehicle falls due to incorrect positioning or objects.
Guidelines for preventing slipping hazards from oil spills.
Precautions regarding risks of electric shock.
Information on potential component failures during operation.
Hazards associated with using the lift for unintended purposes.
Requirements for qualified personnel and installation prerequisites.
Guidelines for suitable installation space and safety distances.
Specifications for adequate lighting and floor conditions.
Instructions for positioning the lift columns correctly.
Steps for connecting the hydraulic plant and electrical systems.
Description of the lift's control panel and devices.
Explanation of the main switch and push button operations.
Step-by-step guide for lift operation: sequence, lifting, parking, lowering.
Essential precautions and warnings for performing maintenance safely.
Key guidelines for using tools, spare parts, and maintenance intervals.
Schedule and frequency for routine and periodic maintenance tasks.
Monthly checks for hydraulic power unit and hydraulic circuit.
Checks for hydraulic pump, oil contamination, and oil quality.
Checks required every three months for the hydraulic pump.
Maintenance checks for synchronous systems, cables, and oil replacement.
Guide to troubleshooting and safety precautions for repairs.
A list of common issues, their possible causes, and solutions.
Details on relevant European directives and technical standards.
Notes on disposal of used oil and machine demolition.
Information on ordering spare parts and safety during replacement.
Manufacturer's declaration of conformity to EU directives and standards.
General| Brand | WERTHER INTERNATIONAL |
|---|---|
| Model | 209I/A |
| Category | Lifting Systems |
| Language | English |
