To Next PageTo Next Page
Need help?Do you have a question about the WERTHER INTERNATIONAL 50/24 and is the answer not in the manual?
General| Brand | WERTHER INTERNATIONAL |
|---|---|
| Model | 50/24 |
| Category | Air Compressor |
| Language | English |
Details the manual's integral role and user responsibilities for safe operation.
Lists items included in the compressor packaging, such as the compressor and oil.
Provides guidelines for storing packed compressors at specific temperatures and conditions.
Details gross weights and packing dimensions for various compressor models.
Instructs on proper disposal of packing materials according to local regulations.
Provides guidance on safely handling and positioning compressors using appropriate equipment.
Outlines crucial safety precautions for compressor usage, environment, and user protection.
Identifies and labels the key parts of the compressor with a diagram.
Presents detailed technical specifications for various compressor models including voltage, power, and noise levels.
Illustrates air intake and pressure performance curves for different motor types.
Provides electrical wiring diagrams for motor types 15, 30, and 50.
Details the installation procedure for the compressor on a flat, ventilated surface.
Guides users on correct compressor operation, including power connection and start switch usage.
Details how to adjust maximum and differential pressures using specific screws.
Explains operating limits and recommended usage/standstill proportions based on pressure.
Provides a table of tank filling times for various models and voltages.
Outlines a procedure to check the compressor's filling time and maximum pressure.
Details scheduled maintenance tasks to be performed weekly, monthly, and annually by specialized personnel.
Provides step-by-step instructions for draining and replacing the compressor oil.
Lists common reasons for the compressor failing to start and their solutions.
Diagnoses issues when the compressor runs but fails to achieve maximum pressure.
Addresses problems where the tank pressure increases too slowly or not at all.
Identifies potential causes for the compressor operating without building load, possibly valve issues.
Explains that the motor has automatic thermal protection that stops operation when too hot.
Guides on checking for and rectifying air leaks at connections using soapy water.
Diagnoses leaks from the valve located beneath the pressure switch.
Troubleshoots the compressor starting when no air is being used.
Addresses frequent cycling issues, possibly due to condensate or air leaks.
Identifies a defective pressure switch as the cause for incorrect pressure cut-in/cut-out.
Covers causes for overheating and excessive oil consumption, including incorrect oil type.
Provides safety guidelines for dismantling the compressor and disposing of its parts.
Explains that defective parts replacement must be done by authorized personnel.
Details the required information for ordering replacement parts, including serial number and part code.
Outlines the 12-month warranty terms, exclusions, and conditions for defects.
