Weslo CADENCE CT 5.8 WLTL27308.1 User Manual

28 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

USER'S MANUAL

Serial

Number

Decal

Model No. WLTL27308.1

Serial No.

QUESTIONS?

If you have questions, or if parts are

damaged or missing, DO NOT

CONTACT THE STORE; please

contact Customer Care.

IMPORTANT: Please register this

product (see the limited warranty

on the back cover of this manual)

before contacting Customer Care.

CALL TOLL-FREE:

1-866-699-3756

Mon.–Fri. 6 a.m.–6 p.m. MT

Sat. 8 a.m.–4 p.m. MT

ON THE WEB:

www.wesloservice.com

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

Write the serial number in the

space above for future reference.

www.weslo.com

Table of Contents

Questions and Answers:

J
Joseph BryantAug 2, 2025
How to turn on Weslo CADENCE CT 5.8 WLTL27308.1?
- A
  Alan SmithAug 3, 2025
  First, ensure the power cord is plugged into a surge suppressor, and the surge suppressor is plugged into a properly grounded outlet using a single-outlet surge suppressor. Note that the Weslo treadmill isn't compatible with GFCI-equipped outlets. Then, make sure the key is fully inserted into the console. Finally, check the reset/off circuit breaker located on the treadmill frame near the power cord. If the switch protrudes, the circuit breaker has tripped. To reset it, wait five minutes, and then press the switch back in.
S
Shannon WilliamsAug 9, 2025
What to do if my Weslo Treadmill turns off during use?
- C
  Caitlin MannAug 9, 2025
  If your Weslo Treadmill turns off during use, check the reset/off circuit breaker and, if tripped, wait five minutes before pressing the switch back in. Also, ensure the power cord is securely plugged in and the key is fully reinserted into the console.
G
gutierrezstevenAug 17, 2025
Why is the walking belt off-center on my Weslo CADENCE CT 5.8 WLTL27308.1?
- B
  Brian ArnoldAug 17, 2025
  If the walking belt has shifted to the left, remove the key and unplug the power cord. Use the hex key to turn the left idler roller bolt clockwise 1/2 of a turn, being careful not to overtighten the belt. If the belt has shifted to the right, turn the left idler roller bolt counterclockwise 1/2 of a turn. Plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until centered. If the walking belt slips, remove the key and unplug the power cord. Turn both idler roller bolts clockwise, 1/4 of a turn. When correctly tightened, you should be able to lift each edge of the walking belt 2 to 3 inches off the walking platform. Keep the walking belt centered.
K
Kevin McknightAug 25, 2025
How to fix a Weslo Treadmill walking belt that slows down?
- A
  amanda33Aug 26, 2025
  To address a walking belt that slows down on your Weslo Treadmill, ensure you're using a single-outlet surge suppressor that meets the specified requirements. Also, check if the walking belt is overtightened. If it is, remove the key and unplug the power cord, then use the hex key to turn both idler roller bolts counterclockwise, 1/4 of a turn. When properly tightened, you should be able to lift each edge of the walking belt 2 to 3 inches off the walking platform.

Weslo CADENCE CT 5.8 WLTL27308.1 Specifications

General

Model Number	WLTL27308.1
Maximum Speed	10 mph
Incline Type	Manual
Weight Capacity	250 lbs
Display	LCD
Folding	Yes
Speed Range	0-10 mph
Running Area	16" x 50"
Programs	6
Heart Rate Monitoring	Grip Sensor
Dimensions (L x W x H)	55"

Summary

WARNING DECAL PLACEMENT

IMPORTANT PRECAUTIONS

General Safety Precautions

Read precautions, consult physician, proper use, electrical safety.

BEFORE YOU BEGIN

ASSEMBLY

OPERATION AND ADJUSTMENT

Pre-Lubricated Walking Belt

Explains belt lubrication and warns against using silicone spray or other substances.

Power Cord Connection

Instructions for connecting the power cord, surge suppressor, and grounding.

CONSOLE DIAGRAM

Console Features

Describes manual mode, speed workouts, and console display feedback.

HOW TO TURN ON THE POWER

Manual Mode Operation

Steps to operate the treadmill in manual mode, including starting and stopping.

HOW TO USE A SPEED WORKOUT

Adjusting Treadmill Incline

Steps to change the treadmill's incline levels for varying exercise intensity.

HOW TO FOLD AND MOVE THE TREADMILL

Lowering Treadmill for Use

Instructions on how to safely unfold the treadmill from storage position to ready-to-use state.

TROUBLESHOOTING

Power Troubleshooting

Solutions for power not turning on or turning off, including circuit breaker checks.

Console Display Troubleshooting

Steps to resolve issues with the console display not functioning correctly.

Walking Belt Troubleshooting

Diagnosing and fixing problems with the walking belt slowing, slipping, or being off-center.

EXERCISE GUIDELINES

Exercise Intensity and Heart Rate

Guidance on determining exercise intensity using heart rate zones and measurement techniques.

Workout Guidelines and Frequency

Recommendations for warming up, training, cooling down, and exercise frequency.

PART LIST

EXPLODED DRAWING A

EXPLODED DRAWING B

EXPLODED DRAWING C

EXPLODED DRAWING D

ORDERING REPLACEMENT PARTS

LIMITED WARRANTY

Related product manuals

Preview: Weslo Cadence CT 4.8

Weslo Cadence CT 4.8

Weslo Cadence 500

Preview: Weslo Cadence 825

Weslo Cadence 825

Preview: Weslo Cadence 830

Weslo Cadence 830

Preview: Weslo Cadence 200

Weslo Cadence 200

Preview: Weslo Cadence 955

Weslo Cadence 955

Preview: Weslo CADENCE c22

Weslo CADENCE c22

Weslo CADENCE DL3

Preview: Weslo Cadence 925

Weslo Cadence 925

Weslo Cadence 300

Weslo Cadence 930