Wespro Power Tools PS400 - Practical Operations and Usage; Rivet Nut Insertion Methods; Tool Operation and Adjustments

Practical Operations
1.
OR
2.
3.
Notes:
For adjustable clutch type, please turn the torque adjusting cap to designated size of rivet. If necessary, adjust the air
pressure to achieve the performance for all PS series Pull Setter.
Insert the rivet nut into
the prepared hole of
work piece.
Turn the rivet nut onto draw
bolt first and insert rivet nut
into work piece.
Keeping the tool square to work piece. Press the top rocker
trigger (pistol type) or lever (straight type). The tool will stall
out when the rivet nut is completely installed.
Release the top rocker trigger and press the bottom trigger
(pistol type) or depress reverse button (straight type) to
disengage the tool from rivet nut.