English - 4
CONTROL PANEL and FUNCTIONS
LCD DISPLAY: Remove the plastic film from the display before use. The display
indicates when the appliance is ready for use. When the appliance is first plugged in,
there will be an audible beep and the default program is displayed. “1 3:00” appears on
the display. The “1” specifies which program is selected (1-12 programs) and the “3:00”
is the length of the program in hours: minutes. The marking at the top of the display
indicates the weight of the loaf selected (1.5 lb or 2 lb) with 2 lb as the default. The
other marking at the top of the display indicates the degree of browning that is selected
(light, medium, or dark) with medium as the default. As the program proceeds the digits
of the time displayed will decrease progressively indicating remaining time.
“START/STOP” Button: The “START/STOP” button is used to start or cancel a
program. A short alert is heard with each press of the “START/STOP” button. Press
this button when the breadmaker is idle to start the program. When the breadmaker
is active, press and hold this button to cancel the program. When you
cancel the program, the breadmaker will return to its default settings for the chosen
menu selection. All customized settings will be lost if the program is cancelled.You
must set all desired program settings before starting the program. The program
cannot be changed after the cycle has begun, unless you cancel the cycle.
“ + “ and “ - ” Buttons: The “ + “ and “ - ” buttons are used to set a delayed
program end time. Only the following programs can be used with the delay timer: (1)
“Basic,” (2) “French,” (3) “Whole wheat,” (4) “Quick,” (7) “Super rapid,” (10) “Cake,”
(11) and “Sandwich” (12) “Bake.” The (5) “Sweet,” (6) “Gluten free,” (8) “Dough,” and
(9) “Jam” programs can not be started with the delay timer. The delay hours and
minutes will be added to the preprogrammed times for the specific program. The
time indicated in the display is the time until the end of the cycle. The maximum time
delay is 13 hours per program. Note: When delay start time has been selected, press
“START/STOP” button. As time counts down, the : will blink to indicate that it is working.
DELAY START: The maximum time delay is 13 hours per program.
Example: It is 8:30 p.m. and you would like the bread ready for the next morning at
7:00 a.m. Determine the time difference, 7:00 a.m. is 10 hours and 30 minutes ahead
of 8:30 p.m. Press the “ + “ or “ - ” buttons until 10:30 appears in the display.
NEVER use the time delay function when using perishable ingredients such as milk,
eggs, fruit, yogurt, etc.!
“COLOR” Button: “COLOR” cycles to select the crust darkness: Light, Medium,
and Dark. The default color is Medium.
“LOAF” Button: The “LOAF” button adjusts the various programs for the selected
loaf size; “1.5 lb.” or “2 lb.” This button is only applicable for the following programs:
“Basic,” “French,” “Whole wheat,” “Sweet,” “Gluten free,” “Super Rapid,” and
“Sandwich.” Note: Changing either the color or the loaf size will automatically adjust
the time displayed.
To Next Page
Loading...
Need help?
General
