To Next PageTo Next PageWhat to do if the hydraulic pressure switch is blocked in my Westen Boiler?
First, check that the pressure in the system is correct, referring to section 6. If the problem continues after verifying the pressure, it's best to call the Authorised Service Centre for further assistance.
How to fix a failed ignition shutdown on my Westen Boiler?
Try pressing and holding the “R” button for at least 2 seconds. If the problem persists after this, contact the Authorised Service Centre for assistance.
What to do if the safety thermostat tripped on my Westen quasar D?
Press and hold down the “R” button for at least 2 seconds. If the issue continues, it is recommended to call the Authorised Service Centre.
How do I fix a parasite flame error on my Westen quasar D?
You can try pressing and holding down the “R” button for at least 2 seconds. If the error continues to occur, contact the Authorised Service Centre.
Common faults, error codes, and corrective actions for the boiler.
Recommendations for regular servicing to ensure efficiency and safety.
Step-by-step instructions for physically mounting and connecting the boiler.
Guidelines for installing the exhaust flue and air intake ducts.
Instructions for making electrical connections to the boiler.
How to connect an external room thermostat to the boiler.
Detailed steps for converting the boiler for different gas types.
Guide to configuring various boiler parameters.
Information on boiler safety devices and their adjustments.
Recommendations for regular servicing to ensure efficiency and safety.
Detailed electrical wiring schematic for the boiler.
General
