WESTERLY Konsort 29 - Page 35

New Rope
New
halyards are slippery.
lf
the
halyard
slips
when in
the
"CLUTCH" mode,
use the
MANUAL LOCK-DOWN
facility
until the
halyard has
been
worked in.
Release
ln normal
wind
conditions
the
load
can be
effoftlessly
re-
leased simply by
lifting
the
handle without using the
winch.
ln heavier
weather release
is
still
possible
this
way
-
but
for
reasons of safety
and rope care,
rope
should
be
re-tensioned
on the
winch
drum before
releasing
the
clutch.
For
safe
re-
lease,
the
handle
should
be
moved into
its fully-open
position
so that
the cam
is
lifted well
clear
of
the
moving
rope.
After
release
the
handle
should
be
moved into
its fully-open
position
so that
the cam
is lifted
well
clear
of the
moving
rope. After
release
the
handle should be
closed once
more
-
not left open to
get
in
the
way
of the
rigging or crew.
Warranty
ln
the event
that this
product
fails
to
perform
satisfactorily
for
any
reason, a
rapid help
and
advice service
is operated by
the
manufacturer.
Each
clutch
unit
is
covered
by a two
year
warranty and any
claim under
this warranty should
be made
directly to Spinlock
at the
following address:
SPINLOCK
CUSTOMER SERVICE
OFFSHORE
INSTRUMENTS
LTD.
41 BIRMINGHAM ROAD
COWES
ISLE
OF
WIGHT
PO31 7BH
UNITED
KINGDOM
TELEPHONE:
(0)
983
295555
2.21