WESTERLY Konsort 29 - Page 59

This
icated
bearing
is normally
man
oprene
or
polyurethane
and
has
a
long
.
'High
silt,'sand and
mud
levels
will
Cutlass
Bearing
cause
accelerate
wear.
A
-
Grub Screw
or
Roll Pin
c
ä
-'ääär<etr
G
-
Cutlass Bearing
D
-
Bearing
Shell
Fig.6
-
Cutlass
Bearing
Calcium
Deposits
ln
certai
for long
periods,
the
propeller
shaft.
lf in
the
cutlass
bearing,
ime,
the hard
calcium deposit can damage
the
bearing
surface.
This is
normally
associated
with noise
and
vibration from
the
bearing area. lf this happens, stop
the
engine
immediately
and
investigate. The
deposit can be
removed with
a sharp
scraper. To
gain
access
to the
bearing area, uncouple
the
propeller
shaft at
the
engine and
slide
it
back
untilthe
affected area is
exposed.
4.13