T
Tamara TorresAug 8, 2025
What to do if the brush on my Westermann WR 840 Battery doesn't turn even after moving the direction change lever?
- LLaura BrownAug 8, 2025
If the brush on your Westermann Floor Machine does not turn despite moving the director change lever, consider the following: * Ensure the direction of rotation change lever is in the correct drive position. * Check the V-belt and replace it if defective. * Tighten the drive belt tensioning bolt. * Adjust the toothed belt tensioning device if the timing belt pretension is insufficient (lever can be pushed beyond the intended holes).