EasyManua.ls Logo

Western TransCube Series - Damage

Western TransCube Series
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
12. Records:
Each owner or operator is
responsible to obtain records
from the periodic inspections
and re-testing of the IBC Tran-
sCube and keep them with the
unit. Place your record and
operator's manual in the vinyl
sleeve provided on the shelf
above the inner tank.
Keep the records available
with the unit and make them
available to Government Rep-
resentatives or Inspectors on
site when requested.
A Record Card is provided
with the Documentation pack-
age to record the compulsory
60 month testing program at
a registered facility. The date
Fig. 18 SLEEVE FOR DOCUMENTS
and test results must be recorded on
the card and stamped on the Specifi-
cation Plate.
13. Damage:
Anything that is transported from loca-
tion to location can be in an accident
and damaged or damaged during
use. Any time the inner or outer tank
is damaged, impaired or compro-
mised in any way, the tanks should be
repaired and then retested up to 3 psi.
Diesel fuel is a hazardous material
and must be treated as such. Do not
use the unit if it is damaged and take
a chance with contaminating your
worksite or the environment. Repair
and retest prior to re-using.
14. Parts and Service:
Transport of Dangerous Goods re-
quires that parts replacement must be
of the same specification or equiva-
lent. It is recommended that genuine
replacement parts be obtained from
Western Environmental Canada Inc.
such as nitrile gaskets, fusible fill
caps, pressure/vacuum relief vent and
gauges.
Call 1-866-539-3781. Please have
your model number, serial number of
your TransCube model ready and the
parts description. Do not return parts.