fb.com/westhillbikes • westhillbikes.com8
3.2 Adjusting The Saddle
• The saddle post must be inserted to at least the circular safety mark
engraved on the tube (shown below).
• An ideal saddle height is when the knee is at a soft bend when you are
sat on the saddle with your foot on the pedal at it’s lowest point. Adjust
the saddle to this height.
• The saddle should be parallel to the ground for maximum comfort.
The tightening torque for the saddle mounting screw and saddle post
mounting screw should not be less than 18 Nm.
Quick release
Safety mark
(exaggerated for
illustration)
3.3 Adjusting The Wheels
• Tighten the screws to make sure the front and back wheels are fi xed to
the front fork and frame.
• Recommended tightening torques are as follows:
Front wheel hub: 18 Nm
Rear wheel hub: 30 Nm
To Next Page
