How to fix a Westinghouse Damen Fan light that does not work?
If the light on your Westinghouse Fan is not working, you can try the following: * Check that the wire connections in the switch housing are properly connected. * Check for faulty light bulbs.
What to do if my Westinghouse Fan does not start?
If your Westinghouse Fan does not start, try the following: * Check the main and branch circuit fuses or circuit breakers. * Check the wire connections as performed in step #13 of the installation instructions.
Why is my Westinghouse Damen wobbling?
If your Westinghouse Fan wobbles, there are several potential causes and solutions: * Ensure all blades are screwed firmly into blade holders. * Verify that all blade holders are tightened securely to the motor. * Confirm that the canopy and mounting bracket are tightened securely to the ceiling joist. * Try interchanging two adjacent blades to redistribute the weight. * Make sure the two set screws on the fan's down rod coupling are tight. Natural variations in wood density can also cause wobble, even if blades are weight-matched.
What to do if my Westinghouse Damen sounds noisy?
If your Westinghouse Fan is making noise, here are a few things you can check: 1. Make sure all screws in the motor housing are snug (but not over tightened). 2. Check that the screws attaching the fan blade holder to the motor are tight. 3. Do not use a solid state variable speed control. 4. Allow a 'break-in' period of about 24 hours, as most noises associated with a new fan should disappear after this time.
General| Fan Type | Ceiling Fan |
|---|---|
| Number of Blades | 5 |
| Remote Control Included | Yes |
| Blade Material | Wood |
| Motor Type | AC |
Describes installation using a downrod for standard ceilings.
Details installation for sloped or vaulted ceilings, potentially requiring special kits.
Guide for installing the fan with the standard included downrod.
Instructions for installing the fan with a longer downrod, sold separately.
Details how to connect fan wires to house wires for pull chain control.
Instructions for restoring power and setting up the remote control receiver.
Guidance on cleaning, checking connections, and general upkeep of the fan.
To Next Page