To Next PageTo Next Page
Need help?Do you have a question about the Westinghouse DBF-16 and is the answer not in the manual?
Procedure for checking the circuit breaker upon receipt and during installation.
Information on connecting current-carrying cables and secondary control wiring.
Information on the overcurrent tripping device, its types, and function.
Steps for removing and installing the overcurrent tripping device.
Procedure for checking and adjusting the overtravel of the tripping device.
Details on adjusting the calibration settings for tripping devices.
Adjustment procedure for the instantaneous pick-up setting.
Adjustment procedure for the short delay pick-up setting.
Calibration adjustment for the short delay feature.
Procedure for checking the circuit breaker upon receipt and during installation.
Information on connecting current-carrying cables and secondary control wiring.
Information on the overcurrent tripping device, its types, and function.
Steps for removing and installing the overcurrent tripping device.
Procedure for checking and adjusting the overtravel of the tripping device.
Details on adjusting the calibration settings for tripping devices.
Adjustment procedure for the instantaneous pick-up setting.
Adjustment procedure for the short delay pick-up setting.
Calibration adjustment for the short delay feature.
General| Tripping Type | Thermal Magnetic |
|---|---|
| Trip Type | Thermal Magnetic |
| Standards Compliance | UL 489 |
| Interrupting Rating | 10kA |
| Type | Molded Case Circuit Breaker |
